A wire rubber grommet is an almost revolutionary discovery in the cable joint market. That part of the component where the cable or bare wire comes out of the body of the component has always been a critical point of failure. When entering and leaving the body, the wire components are very susceptible to friction and wear, which is why this is one of the most sensitive places. There is a possibility of pulling the wires, pulling them out, and of course, interfering or interrupting the operation of the machine or apparatus. To prevent this from happening, wire rubber grommets are used as real saviors of hanging wires or their connection. They create internal relief from bending or wear of the cable in the area of its outlet. This fixes the cables and wires and ensures their better functioning. The friction of the wires with the outer surface is minimized and the stability of their joints is ensured.

These wire rubber grommets are made of high-quality rubber that is resistant to shocks and wears. There is a wide range of these products on the market, and you can choose from as many as 1,500,000 different wire rubber grommets. 

They are resistant to large temperature changes, certain acids, UV radiation. The head of the wire rubber grommet is made of slightly firmer rubber while the body is much more flexible. The head of the wire rubber grommet protrudes from the body of the component while its longer and more flexible part remains inside the component, thus keeping the cables passing through its body. These wire rubber grommets usually have several folds on their body to fix the grommet as much as possible, but also to enable greater flexibility of the body. Depending on the hole at the outlet of the body as well as the thickness of the wires it fixes, the wire rubber grommet can be round, square, or oval. Before ordering these grommets, measure the width of the hole as well as the diameter of the cables passing through it.