APPLICATIONS & SELECTION
3/8-Inch Rubber Grommets: Dimensions and Materials
Three-eighths of an inch equals 9.525 mm. If the drawing specifies that value as the inside diameter, it describes the central passage rather than the whole grommet…
THE GROMMET JOURNAL
Rubber Grommet Insights
Practical perspectives on materials, applications and choosing the right rubber grommet.
Explore the articles
Materials. Profiles. Applications.Browse the journal
594 articles Page 21APPLICATIONS & SELECTION
3/8 Rubber Grommets: Material and Profile
A 3/8 grommet label needs a unit and reference dimension. If the unit is inches, the measurement is 9.525 mm. Check the mounting hole, panel thickness and…
APPLICATIONS & SELECTION
Rubber Electrical Grommets: Defined Protection
Rubber electrical grommets help protect intact cable insulation at a specified opening. They are one part of an electrical installation and do not replace grounding, overcurrent protection…
APPLICATIONS & SELECTION
Rubber Edge Grommets
Rubber edge grommets or edge trim provide an interface along a specified panel edge. They help reduce local abrasion when the profile fits the panel thickness and…
APPLICATIONS & SELECTION
Rubber Cable Grommet Seals
A rubber cable grommet seal provides a specified interface around a cable entry. It must fit both the panel opening and the cable diameter.
APPLICATIONS & SELECTION
Replacement Rubber Grommets for Glass Equipment
A replacement rubber grommet for glass equipment must match the specified joint and mating parts. Different joint constructions are not interchangeable.
APPLICATIONS & SELECTION
8 mm Rubber Grommets
An 8 mm rubber grommet listing needs a defined dimension: 8 mm may refer to the bore, mounting hole or another feature. The nominal size does not…
APPLICATIONS & SELECTION
7/8-Inch ID Rubber Grommets
A 7/8-inch ID rubber grommet has a nominal internal passage of 22.225 mm. Check the mounting-hole size, groove dimensions and panel-thickness range separately.
APPLICATIONS & SELECTION
7 mm Rubber Grommets
A 7 mm grommet specification should identify the feature being measured. Confirm the complete drawing, including mounting-hole dimensions, panel thickness, passage and flange clearance.
APPLICATIONS & SELECTION
6 mm Rubber Grommets
For a 6 mm rubber grommet, identify the referenced dimension on the drawing. The mounting hole, internal passage and outside diameter are different features.
LET’S TALK ABOUT YOUR PART
Turn your requirements into the next step.
Send a drawing, an existing sample or your part requirements for review and quotation.