Fans & ventilation equipment
Review the mounting points, operating speed range and clearance around the fan or enclosure.
Include in your inquirySpeed range, mounting orientation and fastener details.
Rubber components for mounting assemblies
Vibration Grommets
A small component.
A considered mounting solution.
Ribbed rubber grommets for assemblies where fit, compression and movement matter. Explore the reference profile, review your installation, and request manufacture from your drawing or existing sample.
Geometry, compound and assembly conditions are reviewed together.
PRODUCT REFERENCERibbed profile
01
Ribbed contact facesA profile to review in your assembly
02
Material & hardness optionsConfirmed for the specified part
03
Drawing or sample basedFrom review through production
01 / Understand the profile
Start with the drawing.
Check the complete fit.
The reference profile combines a center opening, an outer mounting groove and ribbed faces. Compare all three with the mating parts before selecting a grommet.
- Center openingCheck the bolt, pin or sleeve interface and the clearance required for assembly.
- Mounting grooveMatch the groove to the panel hole and thickness. Include panel tolerances and edge condition.
- Ribbed faces & installed heightReview the contact surfaces, available space and intended compression with the washers and adjacent parts.
The drawing is a profile reference. Confirm units, tolerances and the current drawing revision before ordering; do not scale dimensions from the image.
Discuss This ProfileREFERENCE DRAWINGSection · side · top
02 / Application review
Where the mounting
details make a difference.
These examples help frame your inquiry. Suitability depends on the part, load and complete installation, with performance verified in your assembly.
Small motors & pumps
Define the load at each mounting point, start/stop conditions and any nearby fluid exposure.
Include in your inquiryLoad direction, duty cycle and installation drawing.
Equipment panels & housings
Check the panel interface, retained component and available movement within the enclosure.
Include in your inquiryPanel thickness, hole tolerance and space restrictions.
A cable-protection grommet is not automatically a vibration mount. Select against the mounting requirement and agreed acceptance criteria.
03 / Material & manufacturing options
Specify the compound,
not just the color.
Material family and hardness are starting points. Confirm the compound against temperature, fluids, exposure and the required behavior of the installed part.
Material families for review
The listed families are inquiry options. Availability and suitability are confirmed for the chosen geometry and specification.
Compare material properties04 / Before you specify
Review the assembly,
not only the grommet.
Use these four checks to prepare a clear manufacturing requirement and a meaningful sample evaluation.
Load & orientation
Provide supported mass, load per mounting point, the number of mounts and the direction of loading. Identify any uneven load distribution.
Hardware & compression
Show the bolt, sleeve, washers and panel stack. Specify installed compression or preload and check for unintended rigid contact.
Movement & environment
State operating speed or frequency, movement, shock conditions, temperature and exposure to fluids or outdoor conditions.
Test & acceptance
Define the test assembly, measurement method and acceptance limits. Evaluate fit and performance with production-representative samples.
No universal load capacity, isolation percentage or service-life rating is specified for this reference profile.
Send Your Mounting Requirements05 / Custom manufacturing
Your drawing or sample.
A defined path to production.
Need a different profile, interface or material? We manufacture to customer drawings or existing samples, with requirements agreed before tooling and production.
- 01
Share the requirement
Send a controlled drawing or existing sample details, quantity and service conditions.
- 02
Review & quotation
Confirm manufacturability, specification, tooling needs, sample arrangements and quoted timing.
- 03
Tooling & sampling
Proceed with the agreed tooling and evaluate samples against your fit and performance requirements.
- 04
Approved production
Manufacture against the approved drawing revision, material and inspection requirements.
Plan a sample evaluation
Free samples may be available for eligible projects. Contact us to confirm eligibility and sample arrangements.
06 / Questions before ordering
A clearer specification.
A better starting point.
Need to discuss your particular assembly?
Talk to Our TeamHow do I choose the right vibration grommet?
Start with the mating dimensions and mounting arrangement, then define the load, compression, movement and environment. Review the geometry and compound together, and confirm the proposed part through sample testing in the intended assembly.
Does a softer grommet always isolate vibration better?
Hardness alone does not establish vibration-isolation performance. Geometry, load, installed compression and operating frequency also need to be considered. Define acceptance criteria and evaluate the complete assembly.
Can I order the pictured profile in a different size?
Send your required dimensions or drawing for manufacturability review. We can quote manufacture from a customer drawing or existing sample; tooling, material availability and production arrangements are confirmed for the requirement.
Where are the prices and minimum order quantities?
This profile is quoted after specification review. Send the drawing or reference, material, hardness and required quantity so we can confirm pricing, minimum order quantity and lead time. There is no online size-and-price table for this profile.
Can I request samples before production?
Yes, contact us to discuss evaluation samples. Free samples may be available for eligible projects; eligibility and sample arrangements must be confirmed. Include your test requirements and required quantity.
Can these grommets also provide a waterproof seal?
A vibration-mounting profile does not establish a sealing rating. If sealing is required, specify the medium, pressure or exposure conditions and the acceptance test so the complete assembly can be reviewed.
Move from reference to requirement
Let’s review your
vibration grommet.
Send your drawing or existing sample details, mounting conditions and quantity. We will review the manufacturing requirement with you.
Send a Drawing or RequirementAttach files in the inquiry form.