Keeping your devices safe should be a priority of yours. If you have routed the cables from your main station and the peripherals as well, you would not want anything to happen to them. You maybe didn’t think about the importance of masking the hole that you will be routing your cables through. If you live it as is, the cables can be damaged from abrasion, which could further lead to complete discontinuity. Replacing the devices can be an additional expense that you might not be able to settle, so you should think about prevention. That is where the push-in rubber grommet comes into play. 

They are not that common like the other rubber grommets, but they are as reliable as them, just their shape is different. If we were looking at the other grommets like basic cylinders, these grommets are looking more like cones. However, they are still serving the same purpose, and that is keeping your wires safe. Depending on the conditions in your working place, you have the chance to select the type of rubber that these grommets will be made of. There are many options of synthetic rubbers in our firm, so whatever you need, we will be able to easily deliver. 

There is only one thing that you will have to do before ordering, and that takes correct measurements. You should start with the diameter of the hole, and continue with the diameter of the cable you are trying to route through the grommet. You should be able to find those measurements in the chart on our site. If you have dimensions that are not listed, our firm can make a special-sized push-in grommet for your situation. Installing them is pretty easy, firstly you run the cable through the grommet, and then you just press it in place.