The rubber slot grommet is a small piece, usually in a circular shape with middle cutouts that can be used for a variety of purposes in many different industries. These units can be easily mounted on any surface and they prevent damages happening to the edges of the equipment and they also protect any wires or cables from tearing while they are used. They can be used as a sleeve for protecting your equipment, and they present excellent physical properties. With that, they can be installed both inside and out, and they will not be affected by the weather or any other external influences. 

Note that before installing the rubber slot grommet, you need to make sure that the space is clean and that there is no dust or dirt on both the grommet and the hole that you need to seal. If there is any debris on either one of the units, the seal will not be as tight, there may be air bubbles, and chances are, the grommet will become loose in time. 

There are different ways to clean the equipment, and since rubber is a material that is not going to be affected by water or chemicals, you can easily just wash it with soap and water. Before installing the rubber slot grommet on any surface, make sure everything is completely dry. This will prevent any moisture to get trapped in, and with that, you will prevent any damages to your equipment. Most of the rubber slot grommet types don’t need any special tools to be installed, and you can easily push or wrap them around the hole that needs to be protected. If you need any aid with the installation method, you can reach out to us, and we will help you learn what you need to do to ensure the success of your project.