The first thing you’ll learn about electrical wire grommets is that they’re rings manufactured from plastic or rubber. Although they have many uses and applications, the main purpose of these items is to prevent the damage of circuits or cables passing through them. But, to secure the cables, the electrical wire grommets need to be used properly and to do so, you’ll need to take the following steps:In most cases, these items need to be installed over sharp edges, so you need to choose the right type and size. You’ll have to measure the area/hole where you’ll place the items, which you can do by simply using a meter. By measuring correctly, you’ll ensure that you opt for suitable electrical wire grommets, but more importantly, you can protect the objects that are passing through it.

Familiarizing yourself with the measurements of the item you will be placing will allow you to recognize the right thickness. Keep in mind, if you’re installing a connector in it, do so by following the guide. The electrical wire grommets also need to be stretched slightly. However, don’t stretch them too much because they might get damaged or even worse, torn.Once you’re done with the aforementioned steps, you’ll have to position the grommet. If you can access the other side of the surface/hole you’ll be able to pull it into the right place. You might need to press the sides of the electrical wire grommets a little bit and if it doesn’t want to stay in place, you can use a little bit of glue to fix it. When you’re done, you can pass the cables through the hole, and they’ll be secured.