It is important to note that, the main purpose and usage of split grommet, is to make sure that everything that goes through the hole in the panel will be both isolated and protected. Split grommets have many uses. They are widely used in the automotive industry that requires many cables and wires to be routed through multiple panels, particularly at the moment, as modern vehicles are relying significantly on many different electronic devices. Split grommets are also used in race cars in order to prevent unwanted smoke and fumes from getting into the driver’s zone, as well as to keep the lines from rubbing and abrasion on harsh surfaces. They are a perfect polishing touch to everything that goes through trim installations in hot rods and customized automotive applications. Electrical cables, fuel and oil lines, air and fluid hoses, as well as all the other wiring, which are included, can cause an ordinarily detailed installation to look incomplete. By using split grommet you will have a well detailed and nice appearance to your car. Split grommets come with a variety of other usages as well, they are used for marine, commercial equipment, recreational vehicles, etc. Split grommet provide a smoke-proof seal when fuel pipes, oil lines, control cables or wiring looms are passing through your vehicle’s bulkhead. They allow pipes to penetrate metal, GRP or carbon body panels safely with no rubbing or wear, plus they allow you to install hoses with pre-mounted hose fittings with larger diameter without having to disassemble them. Although these professional seals do not come at a low cost, they are actually proven to be much cheaper when compared to the use of bulkhead fittings or multiple hose fittings where one fitting is capable of performing the same job, despite the fact that one fitting actually provides many fewer places where a leak can happen.