A large rubber grommet can provide edge protection for a cable, hose or bundle passing through a panel. Choose the actual profile and dimensions before preparing the opening.
Preparing the opening
Check the specified cutout size, panel thickness and tolerances. Remove burrs and make sure the opening has no damaged edges. A curtain-eyelet template or two-piece fabric-fastener procedure is not an installation method for a push-in rubber grommet.
Seating and inspection
Follow the part instructions to seat the retaining groove around the opening without tearing the rubber. Check both sides of the panel and confirm that the flanges overlap the edge as intended. Do not force an incorrectly sized part into place.
Support heavy hoses and cable bundles separately where required. A large grommet does not automatically provide strain relief or a watertight seal; those functions need an appropriate part specification and assembly verification.
