APPLICATIONS & SELECTION
2-Inch Round Rubber Grommets
A 2-inch round rubber grommet must be selected from a complete drawing. Two inches equals 50.8 mm, but the label may refer to different features.
THE GROMMET JOURNAL
Rubber Grommet Insights
Practical perspectives on materials, applications and choosing the right rubber grommet.
Explore the articles
Materials. Profiles. Applications.Browse the journal
594 articles Page 23APPLICATIONS & SELECTION
2-Inch ID Rubber Grommets
A 2-inch ID rubber grommet has a nominal internal passage of 50.8 mm. This does not define the required mounting-hole diameter or a universal medium-size category.
APPLICATIONS & SELECTION
Two-Hole Rubber Grommets
A two-hole rubber grommet provides two specified passages within one mounting profile. It can separate cables or tubes when the dimensions and layout suit the application.
APPLICATIONS & SELECTION
Rubber Grommets: Quantity, Size and Mounting Duty
A request for two rubber grommets states a quantity, not a size or performance requirement. Specify each part's dimensions and intended function when ordering.
APPLICATIONS & SELECTION
1/2-Inch ID Rubber Grommets
A 1/2-inch ID rubber grommet has a nominal internal passage of 12.7 mm. ID describes the opening through the grommet, not the panel cutout.
APPLICATIONS & SELECTION
1.75 Rubber Grommets: Confirming the Specification
A size written as 1.75 needs a unit and a reference dimension. If the unit is inches, the measurement equals 44.45 mm.
APPLICATIONS & SELECTION
1-Inch Grommet Bores: Cable Bundle and Connector Clearance
ID means inside diameter. A 1-inch ID rubber grommet has a nominal central passage of 25.4 mm; the required mounting hole is a separate dimension.
APPLICATIONS & SELECTION
1-1/4-Inch Rubber Grommets
One and a quarter inches equals 31.75 mm. A 1-1/4-inch grommet label does not automatically mean it is intended for a cable of that diameter.
APPLICATIONS & SELECTION
14 mm Rubber Grommets
A 14 mm grommet needs a dimensioned drawing to establish fit. Identify whether the measurement describes the mounting hole, internal passage or outside diameter.
APPLICATIONS & SELECTION
15 mm Rubber Grommets
A 15 mm rubber grommet should be selected for a defined opening and function. Confirm which feature the size refers to and check the complete product drawing.
LET’S TALK ABOUT YOUR PART
Turn your requirements into the next step.
Send a drawing, an existing sample or your part requirements for review and quotation.